Plamokojo Vortex Stirrer Turbo Model kit Paint Mixer Hobby Tool PMKJ020

PMKJ020 Vortex Stirrer Turbo (Hobby Tool) Plamokojo [What is the Plamo Improvement Committee? ] – Comfortable modeling in an organized environment. – [Plastic Improvement Committee] was born as a new brand to deliver to everyone who creates plastic models, from beginners to veterans, in order to build an ideal model life that everyone has dreamed of. – It is important to stir the pigments that have collected at the bottom of the paint bottle well in order to make the plastic model paints look exactly as you imagined. – Acrylic paints and enamel paints are particularly viscous, and it takes a lot of patience to stir them by hand. – [Vortex Stirrer Turbo] is a mixer exclusively for plastic model paint that can rotate the paint at high speed while still in the bottle and stir up the pigment accumulated at the bottom with the power of the vortex. – Just set it in the clip-type holder and turn the knob to automatically mix the paint evenly. – It is an epoch-making item that can be used for all types of plastic model paint bottles, surfacers, decal pastes, and spray cans, and can be thoroughly stirred in a short time. [feature] – Turn the knob to complete stirring! Just place the paint in the bottle holder, clip it on and you’re ready to go. – If you turn the knob on the front according to the size of the bottle, it will start rotating and stirring. – With a timer function, it will automatically stop after 2 minutes. – Specially designed rotating stage and powerful motor to stir paint quickly and smoothly. – The power of the vortex mixes the pigments and paint ingredients well to create the original color of the paint, allowing you to paint exactly as you imagined. – Especially pigments that stick strongly to the bottom, such as enamel paints and fluorescent paints, can be rolled up and mixed well. – Can be used continuously up to 5 times (5 times) at a time. In addition, you can do other work with your hands free while stirring, which increases work efficiency. *If you use it more than 6 times, wait for about 10 minutes before using it again. – Compatible with a wide range of plastic model paints and decal glues – The clip of the bottle holder has a special shape that firmly grips all commercially available plastic model paints. – You can also set and stir square bottles of paint, decal paste, and spray cans for plastic models, and you can stir faster and more powerfully than manually. *You cannot use spray cans with a large diameter or length that are not for plastic models. – Speed can be adjusted according to the paint – There are 3 levels of speed adjustment according to the size of the bottle. – By turning the knob to the right, the rotation speed gradually increases. – Blue gauge (low rotation speed): large capacity spare bottle (40-50ml), surfacer (40-50ml), model can spray (100ml), etc. – Yellow gauge (medium rotation speed): lacquer, water-based acrylic paint (10-30ml), etc. – Red gauge (high rotation speed): Check the condition of the paint you want to mix, such as enamel paint (10 ml or less), and adjust the rotation speed within the above range. * Please be sure to observe the corresponding speed and use it as it may cause malfunction or the set container may pop out. *If you have small children, please be careful not to accidentally touch the knob or rotating mechanism, as it may lead to injury or the bottle popping out. * If the bottle has less paint capacity, fill it with an appropriate amount of solvent before using it. *If the paint has not been used for a long time, the pigment may stick to the bottom of the bottle, so it is recommended to turn the bottle more than twice. *The greater the amount of paint inside, the louder the recoil and operating noise when rotating. – No mess, no paint loss – [Vortex Stirrer Turbo] rotates the paint bottle without opening the lid of the paint and stirs it only with the power of the vortex, so it can be mixed without using a stirring tool such as a muddler, iron ball or magnet. – Since there is no need to put anything in the paint or touch the paint directly, there is no loss due to wiping off the paint adhered to the tool. – If you use it in combination with the [Sauce Inner Cap] (sold separately), you can mix the paint and remove it without any tools. – The compact design does not interfere with the work area, and the size of the main unit is designed to fit in the palm of your hand, so it does not put pressure on the work area. – In addition, the bottom has many suction cups to firmly grip the tabletop, so it can be used stably even at high speeds. – Easy-to-use USB power supply and safety device [Vortex Stirrer Turbo] comes with a USB cable and a dedicated AC adapter, so you can use it right away. – In addition, since it can operate with a commercially available mobile battery, it can be used with mobile power supply even if there is no outlet at hand. (A mobile battery with a rated output of 2A (10W) is required.) – Since a safety device is installed, it is a safety design that stops operation when an abnormality such as high heat or overcurrent is detected. [Notes] – Do not use for products other than model paint. – This product cannot be used on solid wood or a top plate with an uneven surface, as the suction cups will not adhere to it. – If the suction cup is dirty, it may move or cause vibration and noise, so please keep the installation location and the suction cup clean. – Make sure the lid of the container is closed beforehand as the paint may splatter. Also, do not use with the lid open. – Do not use containers that cannot be gripped firmly by the main body clip, such as containers that have a dirty surface or are wet with oil or water. – Please refrain from using this product with a stirrer (metal ball) in a glass container as it may scratch and break the container. – We do not guarantee compatibility with all commercially available paints. If you notice any abnormalities in the paint or container due to the use of this product, please stop using it immediately. – Please refrain from using this product for special paints whose mixing method is specified by the paint manufacturer. – Please adjust the speed according to the range of the speed gauge corresponding to each paint, as the main body may be damaged or the set container may pop out. In particular, do not use large containers at high speed. – Do not use for more than 5 consecutive times (10 minutes) as the motor and moving parts will heat up. – When the safety device is activated, it will rotate and stop repeatedly, and normal operation will not be possible until it returns to normal temperature. Turn off the power and let it rest for 10 minutes or more. – Do not disassemble or modify the product. – Please use the included AC adapter or a USB charger rated at 10W (5V-2A) or higher. – Do not connect/disconnect the USB cable to turn ON/OFF the rotation. – Be sure to return the knob to OFF after use. – This product is designed with quietness in mind, but it is not a completely soundproof product. Please note that vibration noise may be heard depending on the size of the set container and the installation environment. [Product content] – Vortex stirrer body x 1 – AC adapter x 1 – USB Type-C cable x 1 – Size: Body: W85 x H105 x D85mm (excluding protrusions) – USB Type-C cable (USB-TypeAtoC) about 1.5m